Admin (Log Status/Firmware Update - Card Ip Address) - Cobalt Digital Inc 9903-UDX-ADDA Product Manual

3
Table 3-2 9903-UDX-ADDA Function Menu List — continued
• Log Status and Download Controls
Admin (Log Status/Firmware Update -
Card IP Address)
• Card Check and Restore Utilities
• NTP Clock Setup
3-56
9903-UDX-ADDA Function Menu List and Descriptions
Provides a global card operating status and allows a
log download for factory engineering support.
Also provides controls for selecting and loading card
firmware upgrade files, and for setting the card comm
IP address.
• Log Status indicates overall card internal operating status.
• Download Log File allows a card operational log file to be saved to
a host computer. This log file can be useful in case of a card error or
in the case of an operational error or condition. The file can be
submitted to Cobalt engineering for further analysis.
• Delete Log File deletes the currently displayed log file. A second
confirmation dialog is displayed to back out of the delete if desired.
• Thermal Shutdown enable/disable allows the built-in thermal
failover to be defeated. (Thermal shutdown is enabled by default).
CAUTION
The 9903-UDX-ADDA FPGA is designed for a normal-range
operating temperature around 85° C core temperature. Operation in
severe conditions exceeding this limit for non-sustained usage are
within device operating safe parameters, and can be allowed by
setting this control to Disable. However, the disable (override)
setting should be avoided under normal conditions to ensure
maximum card protection.
Memory Test allows all cells of the card FPGA memory to be tested.
This control should only be activated under direction of
product support. Exercising the memory test is not part of
normal card maintenance.
Restore from SD Card allows card rendered inoperable to be restored
using an SD memory card fitted to the card internal SD slot.
Product support must be contacted prior to performing this
operation. Use of any SD card not supplied by support can
corrupt the card.
Allows device NTP clock IP source and localization. This is the clock/time
device will use for logs and other recorded actions.
• NTP IP sets the IP address where NTP is to be obtained.
• Local Timezone sets the recorded time to the localized time.
• NTP Status shows if time is synced with NTP or if an error exists.
9903-UDX-ADDA PRODUCT MANUAL 9903UDXADDA-OM (V1.5)