9933-Emde-75/110 Rear I/O Modules; Technical Specifications - Cobalt Digital Inc 9933-EMDE-75 Product Manual

Introduction

9933-EMDE-75/110 Rear I/O Modules

Technical Specifications

Table 1-1 Technical Specifications
Item
Part number, nomenclature
Installation/usage environment
Power consumption
Installation Density
Environmental:
Operating temperature:
Relative humidity (operating or storage):
Frame communication
9933EMDE-75-110-OM (V1.4)
Note: If network remote control is to be used for the frame and the frame has not yet
been set up for remote control, Cobalt
User Guide (PN 9000RCS-RM) provides thorough information and
step-by-step instructions for setting up network remote control of Cobalt
cards using DashBoard™. (Cobalt
Remote Control Panel product manuals have complete instructions for setting
up remote control using a Remote Control Panel.)
Download a copy of this guide by clicking on the Support>Reference
Documents link at www.cobaltdigital.com and then select DashBoard
Remote Control Setup Guide as a download, or contact Cobalt
Contact Cobalt Digital Inc. (p. 1-10).
The 9933-EMDE-75/110 physically interfaces to system video connections at
the rear of its frame using a Rear I/O Module.
All inputs and outputs shown in the 9933-EMDE-75/110 Functional Block
Diagrams (Figure 1-1) enter and exit the card via the card edge backplane
connector. The Rear I/O Module breaks out the 9933-EMDE-75/110 card
edge connections to BNC and other connectors that interface with other
components and systems in the signal chain.
The full assortment of 9933-EMDE-75/110 Rear I/O Modules is shown and
described in 9933-EMDE-75/110 Rear I/O Modules (p. 2-4) in Chapter 2,
"Installation and Setup".
Table 1-1 lists the technical specifications for the 9933-EMDE-75/110 3G/
HD/SD-SDI 16-Channel Unbalanced/Balanced AES Embedder /
De-Embedder card.
9933-EMDE-75/110 3G/HD/SD-SDI 16-Channel Unbalanced/
Balanced AES Embedder / De-Embedder
Intended for installation and usage in frame meeting openGear™
modular system definition
< 18 Watts maximum
Up to 20 cards per 20-slot frame
32° – 104° F (0° – 40° C)
< 95%, non-condensing
10/100/1000 Mbps Ethernet with Auto-MDIX
9933-EMDE16-75/110 PRODUCT MANUAL
Technical Specifications
®
reference guide Remote Control
®
OGCP-9000 and OGCP-9000/CC
Characteristic
®
®
as listed in
1-9