Presets - Cobalt Digital Inc 9903-UDX-ADDA Product Manual

Operating Instructions
Table 3-2 9903-UDX-ADDA Function Menu List — continued

Presets

• Preset Layer Select
Allows selecting a functional layer (or "area of concern") that the preset is concerned with. Limiting presets to a layer or area of
concern allows for highly specific presets, and masks changing card settings in areas outside of the layer or area of concern.
Example: Since EAS audio routing can be considered independent of scaler settings, if normal audio routing was set up with a
particular scaler setting in effect, and at a later time EAS audio routing is desired to be saved as a preset, selecting In Audio
Routing here limits preset-invoked changes to only the audio routing layer, "telling" the preset save/load to not concern itself with
scaler settings. In this manner, when the EAS audio routing preset is invoked any scaler settings in effect will remain untouched,
with only the input audio routing changes invoked.
• Preset Enter/Save/Delete
Protected state –
changes locked out
• Preset Save/Load Controls
9903UDXADDA-OM (V1.5)
9903-UDX-ADDA Function Menu List and Descriptions
Locks and unlocks editing of presets to prevent accidental overwrite as
follows:
• Protect (ready): This state awaits Protected and allows preset Save/
Delete button to save or delete current card settings to the selected
preset. Use this setting when writing or editing a preset.
• Protected: Toggle to this setting to lock down all presets from being
inadvertently re-saved or deleted. Use this setting when all presets
are as intended.
• Create New Preset: Field for entering user-defined name for the preset
being saved (in this example, "IRD Rcv122").
• Save: Saves the current card settings under the preset name defined
above.
Ready (open) state –
changes can be applied
•
•
•
9903-UDX-ADDA PRODUCT MANUAL
Allows user control settings to be saved in a Preset and
then loaded (recalled) as desired, and provides a
one-button restore of factory default settings.
Default All setting will "look" at all device settings,
and save and invoke all settings when the preset is
invoked (loaded).
Selecting a layer (in this example, "In Audio
Routing") will set the preset to only "look at" and
"touch" input audio routing settings and save these
settings under the preset. When the preset is
invoked (loaded), only the input audio routing layer
is "touched".
• Select Preset: drop-down allows a preset saved above to be
selected to be loaded or deleted (in this example, custom
preset "IRD Rcv122").
• Load Selected Preset button allows loading (recalling) the
selected preset. When this button is pressed, the changes
called out in the preset are immediately applied.
• Delete Selected Preset button deletes the currently selected
preset.
• Load Factory Defaults button allows loading (recalling) the
factory default preset. When this button is pressed, the
changes called out in the preset are immediately applied.
Note: Load Factory Defaults functions with no masking. The
Preset Layer Select controls have no effect on this
control and will reset all layers to factory default.
• Download Presets saving the preset files to a folder on the
connected computer.
3-51