Receiver Diagnostic Testing; System Information (Read Only); System Reset Defaults - DSC TL2803GR Installation Manual

HSPA(3G) Alarm Communicator Installation Manual
[663] Interactive Toggle Option
|____| [1] Interactive Over Serial (ON).
|____| [2] Reserved.
|____| [3] Reserved.
|____| [4] Reserved.
|____| [5] Interactive Protocol ITV2 (ON).
|____| [6] Reserved.
|____| [7] Reserved.
|____| [8] Reserved.

Receiver Diagnostic Testing

[901] Diagnostic Test Transmission
|___| [1] Ethernet 1 Default (OFF).
|___| [2] Ethernet 2 Default (OFF).
|___| [3] Cellular 1 Default (OFF).
|___| [4] Cellular 2 Default (OFF).

System Information (Read Only)

[983] Firmware Update Diagnostics Section
[984] Communicator Status
[985] Radio Initialization Status
[987] Language Version
[988] DNS 1 IP Address
|____|____|____||____|____|____||____|____|____||____|____|____|
[989] DNS 2 IP Address
|____|____|____||____|____|____||____|____|____||____|____|____|
[990] Boot Loader Version
|____|____|____|____|____|____|____|____|
[991] Firmware Version
|____|____|____|____|____|____|____|____|
[992] Ethernet IP Address
|____|____|____||____|____|____||____|____|____||____|____|____|
[993] Ethernet Gateway Address
|____|____|____||____|____|____||____|____|____||____|____|____|
[994] Cellular IP Address
|____|____|____||____|____|____||____|____|____||____|____|____|
[995] SIM Number
____________________________________
[996] Cellular Telephone Number
This number is required for DLS and firmware
upgrades.
____________________________________
[997] IMEI Number
____________________________________
[998] MAC Address
|____| _ ___| _ ___| _ ___| _ ___| _ ___| | _ ___| _ ___| _ ___| _ ___| _ ___| _ ___|

System Reset Defaults

[999] Software Default
Default (99); Valid entries are 00, 11 or 55
|____|____|
49