Adjusting The Speed Controller - Brother BAS-341H Instruction Manual

7-18. Adjusting the speed controller

Upper knob
Lower knob
Valve 2
Valve 1
2566B
BAS-341H, BAS-342H
7. STANDARD ADJUSTMENTS
You can adjust the lifting and lowering speeds for the
work clamp using the knobs on the valves.
・ When the upper knob is tightened, the lifting speed
becomes slower.
When it is loosened, the lifting speed becomes faster.
・ When the lower knob is tightened, the lowering speed
becomes slower.
When it is loosened, the lowering speed becomes faster.
Reference adjustments
Upper knob
Valve 1
Lower knob
Upper knob
Valve 2
Lower knob
You can operate the work clamp when the power is turned
off by pressing the manual buttons (1).
Fully tighten
Fully tighten and then loosen
by 8 turns
Fully tighten and then loosen
by 5 turns
Fully tighten
48