Checking The Machine Head Switch - Brother BAS-341H Instruction Manual

3-19. Checking the machine head switch

1. If the machine head is tilted back, gently return it to its
original position. (Refer to "3-5. Tilting back and returning
the machine head".)
2. Turn on the power switch.
3. Check that no error numbers appear on the LCD panel.
<If error [E050], [E051] or [E055] is displayed >
If the machine head switch (1) is not turned on, error [E050],
[E051] or [E055] will occur.
Adjust the installation position of the machine head switch (1).
1. Turn off the power.
2. Loosen the two screws (2).
3. Push down the right side of the machine head switch (1) so
that the machine head switch (1) turns on, and then tighten
the two screws (2).
4. Turn on the power and check that no error numbers are
displayed.
3989M
BAS-341H, BAS-342H
3. INSTALLATION
22