Using The Stop Switch - Brother BAS-341H Instruction Manual

Direct drive programmable electronic pattern sewer
Hide thumbs Also See for BAS-341H:
Table of Contents

Advertisement

5. SEWING

5-2. Using the STOP switch

If you press the emergency stop switch (1) to during actual sewing, an error dialog box will be displayed and the sewing
machine will immediately stop.
<Continuing sewing from a stopping point>
If the thread breaks or the lower thread runs out during sewing, you can then continue sewing from the point where the
thread broke or ran out.
1
2
(5)
3
start switch
<Returning to the sewing start position without continuing sewing>
If you do not wish to continue sewing, touch "No" (4).
・After home position detection is carried out, the mechanism will return to the sewing start position.
33
3487B
(2)
Touch "Yes" (3) to return to the resewing standby screen.
Touch the
to the position where sewing is to be resumed.
When you touch the
by 1 stitch, and when you touch the
(6)
move forward by 1 stitch.
Depress the start switch.
The sewing machine will start operating and sewing will start.
BAS-341H, BAS-342H
<Clearing>
1. Touch the Reset key (2).
・ The thread will be trimmed, and then the error dialog
box on the screen will disappear and the buzzer will
stop.
2. A dialog box asking you to confirm if you want to
continue sewing will be displayed.
(3)
keys (5) and (6) on the screen to return
key (5), the feed will move backward
(4)
key (6), the feed will
3655B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bas-342h

Table of Contents