4-7. Starting up
Before turning on the power, check that the needle bar is
3482B
at the needle up stop position.
Turn the pulley (1) in the direction of the arrow until the ridge
at the bottom of the thread take-up (2) is aligned with the
index mark.
Aligned
3483B
Turn on the power.
If a program has been registered, the program number and a
preview of the sewing pattern will be displayed.
No programs are registered at the time of shipment from the
factory, and so "---" is displayed as the program number
(No.).
For details on the sewing data reading method, refer to "3.
USING STORAGE MEDIA" in the "LCD Panel/Operation
Panel" Instruction Manual".
BAS-341H, BAS-342H
4. PREPARATION BEFORE SEWING
30