Download Print this page

Brother BAS-341H Instruction Manual page 21

Direct drive programmable electronic pattern sewer
Hide thumbs

Advertisement

< Main P. C. board >
3672B
X pulse motor encoder [5-pin] White
Y pulse motor encoder [5-pin] Blue
Intermittent presser foot pulse motor encoder [5-pin] Black
Machine head switch [3-pin]
Conversion harness [7-pin] White
Machine head memory [6-pin]
Thread trimmer solenoid [6-pin]
Digital tension solenoid / Tension release solenoid [4-pin]
X pulse motor [4-pin] White
Y pulse motor [4-pin] Blue
Work clamp pulse motor [4-pin] Black
Home position sensor [12-pin] White
STOP switch [6-pin] White
Valve harness [12-pin]
Upper thread breakage detector [2-pin] White
Fan [6-pin]
NOTE: Route the X, Y and work clamp pulse motor harnesses so that they do not touch the power supply P.C. board at
the bottom of the control box.
Connectors
BAS-341H, BAS-342H
Connection location on
main P. C. board
P17 (X-ENC)
P18 (Y-ENC)
P19 (P-ENC)
P14 (HEAD-SW)
P15 (PEDAL)
P16 (HEAD-M)
P2 (SOL1)
P3 (SOL2)
P21 (XPM)
P22 (YPM)
P23 (PPM)
P8 (SENSOR1)
P9 (HEAD)
P35 (EX-OUT1)
P36, P9(HEAD)
P7 (SENSOR2)
3. INSTALLATION
Lock the cord
clamp securely.
<Removal>
Press the tab.
<Securing>
Cord clamps /
cable ties
(2)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(2) (3)
(2) (3)
(2) (3)
(2) (3)
(2) (3)
12

Advertisement

loading

  Also See for Brother BAS-341H

  Related Manuals for Brother BAS-341H

This manual is also suitable for:

Bas-342h