Installing The Control Box - Brother BAS-341H Instruction Manual

Direct drive programmable electronic pattern sewer
Hide thumbs Also See for BAS-341H:
Table of Contents

Advertisement

3. INSTALLATION

3-2. Installing the control box

The control box is heavy, so installation should be carried out by two or more people.
In addition, take steps to make sure that the control box does not fall down.
If this is not done, injury to feet or damage to the control box may result.
3606B
10mm or more
Leg
Operator
5
CAUTION
3599B
3608B
BAS-341H, BAS-342H
(1) Control box
(2) Bolts [4 pcs.]
(3) Plain washers [4 pcs.]
(4) Spring washers [4 pcs.]
(5) Nuts [8 pcs.]
NOTE:
Check that the control box (1) is at
least 10 mm away from the leg. If the
control box (1) and the leg are too
close together, it may result in
incorrect sewing machine operation.
(6) Power switch
(7) Wood screws [2 pcs.]
(8) Staples [7 pcs.]
NOTE:
Take care when tapping in the staples
(8) to make sure that they do not
pierce the power cord.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bas-342h

Table of Contents