6. CLEANING
6-3. Checking the regulator
6-4. Cleaning the control box air inlet ports
3607B
6-5. Cleaning the eye guard
6-6. Checking the needle
6-7. Lubrication
Lubricate the sewing machine while referring to "3-18. Lubrication".
35
1.
If water collects in the bottle of the regulator (1), turn the
drain cock (2) in the direction of the arrow to drain the
water.
2. After draining the water, tighten the drain cock (2).
2578B
Use a vacuum cleaner to clean the filter in the air inlet ports
(2) of the control box (1) at least once a month.
Wipe the eye guard clean with a soft cloth.
NOTE:
Do not use solvents such as kerosene or thinner to
clean the eye guard
3493B
Always check that the tip of the needle is not broken and
also that the needle is not bent before starting sewing.
3494B
BAS-341H, BAS-342H
.