Sewing - Brother BAS-341H Instruction Manual

5. SEWING

Do not allow any liquids to get onto this sewing machine, otherwise fire, electric shocks or operating problems may
occur.
If any liquid gets inside the sewing machine (machine head or control box), immediately turn off the power and
disconnect the power plug from the electrical outlet, and then contact the place of purchase or a qualified
technician.
Turn off the power switch at the following times.
If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result.
• When replacing the bobbin and needle
• When not using the machine and when leaving the machine unattended
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in
personal injury or damage to the machine.
5-1. Sewing
WARNING
CAUTION
1. Turn on the power.
2. Touch the △ or ▽ key to select the number for the
program to be sewn.
* For details on reading sewing data from SD cards and
USB memory devices, refer to "3-4. Importing items of
sewing data separately" in the "LCD panel/Operation
pane" Instruction Manual.
3. Lower the work clamp (2) and then depress the start
switch (1).
Home position detection will be carried out.
4. Place the materials under the work clamp (2).
5. Depress the work clamp switch (3).
The work clamp (2) will be lowered.
6. Depress the start switch (1).
The sewing machine will start sewing.
7. After sewing is completed, the thread trimmer will
3551B
operate. And then the work clamp (2) will be raised.
Use a work clamp which will hold the material securely
so that it does not slip. If the material slips when using
the standard work clamp and feed plate, process them
so that the material does not slip.
3486B
BAS-341H, BAS-342H
5. SEWING
32