Upgrade Gwn7000 - Grandstream Networks GWN7000 Firmware Upgrade Manual

UPGRADE GWN7000

The GWN7000 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method.
Follow below steps to successfully upgrade your device:
1. Access GWN7000 web interface and navigate to System Settings->Maintenance.
2. In Upgrade Via dropdown list, select appropriate protocol (HTTP, HTTPs or TFTP).
If using Grandstream server, select HTTP.
3. In Firmware Server field, enter the FQDN or IP Address of the server where the firmware file is
located.
If using Grandstream server, enter "firmware.grandstream.com". To upgrade to beta firmware (if
available) enter "firmware.grandstream.com/BETA".
4. Press Save button.
5. To start the upgrade, there are two options:
a. Press Upgrade Now button to start upgrade immediately.
b. Press Reboot button to restart the unit. GWN7000 will contact firmware server to start
upgrade if option "Check/Download New Firmware at Boot" is enabled.
6. If a new firmware is available, GWN7000 will download the firmware file and start upgrade process.
Please refer to Firmware Upgrade Settings for advanced options.
Important:

The GWN7000 will reboot automatically after the firmware upgrade is done.

Please do not interrupt or power cycle the GWN7000 during upgrading process.
Notes:

Service providers should maintain their own firmware upgrade servers. For users who do not have
TFTP/HTTP/HTTPS server, some free windows version TFTP servers are available for download from:
http://www.solarwinds.com/products/freetools/free_tftp_server.aspx
http://tftpd32.jounin.net
End users can also choose to download a free HTTP server from
Microsoft IIS web server.

The latest firmware is available at http://www.grandstream.com/support/firmware. Unzip downloaded
file and make the firmware file (*.bin) available in your firmware server.
GWN7000 Firmware Upgrade and Backup Guide
http://httpd.apache.org/ or use
P a g e | 4