Table of Contents
Advertisement
Manual transaxle
Turn to "LOCK"
Push
You must push in the key to turn it to
"LOCK" position. It locks the ignition, and
prevents normal use of the steering wheel
after the key is removed.
To release the steering lock, insert the key
and turn it clockwise to one of the other
positions. If you have trouble turning the
key to unlock the steering, try turning the
steering wheel slightly to the right or left
while turning the key.
ACC
Accessories such as the radio can oper-
ate, but the engine is off.
ON
This is the normal operating position. All
electrical systems are on.
START
This is the position for starting the engine
using the starter motor. The key should be
released from this position as soon as the
engine starts.
Ignition key reminder (if equipped)
60G033
A buzzer sounds intermittently to remind
you to remove the ignition key if it is in the
ignition switch when the driver's door is
opened.
OPERATING YOUR VEHICLE
81A297S
WARNING
• Never return the ignition switch to
"LOCK" position and remove the
ignition key while the vehicle is
moving. The steering wheel will
lock and you will not be able to
steer the vehicle.
(Continued)
54P00-01E
3-4
Advertisement
Table of Contents
