Ring/Network Coupling
Select the control port
With "Control port" you specify at which port you are connecting the
control line.
You will find the port assignment for the redundant coupling
in
table
12.
Device
Coupling port
RS2-./.
Port 1
RS2-16M
Adjustable for all ports
(default setting: port 1)
RS20, RS30,
Adjustable for all ports
RS40
(default setting: port 1.4)
OCTOPUS
Adjustable for all ports
(default setting: port 1.4)
MICE
Adjustable for all ports
(default setting: port 1.4)
PowerMICE
Adjustable for all ports
(default setting: port 1.4)
MS20
Adjustable for all ports
(default setting: port 1.4)
MS30
Adjustable for all ports
(default setting: port 2.4)
RSR20/RSR30 Adjustable for all ports
(default setting: port 1.4)
MACH 100
Adjustable for all ports
(default setting: port 2.4)
MACH 1000
Adjustable for all ports
(default setting: port 1.4)
MACH 3000
Adjustable for all ports
MACH 4000
Adjustable for all ports
(default setting: port 1.4)
Table 12: Port assignment for the redundant coupling (two-Switch coupling with
control line)
Note: Configure the coupling port and the redundancy ring ports on different
ports.
UM RedundConfig L2P
Release 8.0 05/2013
5.2 Preparing a Ring/Network
(see figure 38)
Control port
Stand-by port (can only be combined
with RS2-../.. )
Adjustable for all ports
(default setting: port 2)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 2.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
(default setting: port 2.3)
Adjustable for all ports
(default setting: port 1.3)
Adjustable for all ports
Adjustable for all ports
(default setting: port 1.3)
Coupling
81