Preparing A Ring/Network Coupling; Stand-By Switch - Hirschmann RS20 User Manual

Ring/Network Coupling
5.2 Preparing a Ring/Network
Coupling
5.2.1

STAND-BY switch

All devices have a STAND-BY switch, with which you can define the role of
the device within a Ring/Network coupling.
Depending on the device type, this switch is a DIP switch on the devices, or
else it is exclusively a software setting (Redundancy:Ring/Network
Coupling dialog). By setting this switch, you define whether the device has
the main coupling or the redundant coupling role within a Ring/Network
coupling. You will find details on the DIP switches in the "Installation" user
manual.
Device type
RS2-./.
RS2-16M
RS20/RS30/RS40
MICE/Power MICE
MS20/MS30
OCTOPUS
RSR20/RSR30
MACH 100
MACH 1000
MACH 3000/MACH 4000 Software switch
Table 8: Overview of the STAND-BY switch types
Depending on the device and model, set the STAND-BY switch in
accordance with the following table:
62
STAND-BY switch type
DIP switch
DIP switch
Selectable: DIP switch and software setting
Selectable: DIP switch and software setting
Selectable: DIP switch and software setting
Software switch
Software switch
Software switch
Software switch
5.2 Preparing a Ring/Network
UM RedundConfig L2P
Release 8.0 05/2013
Coupling