Hirschmann RS20 User Manual page 55

Multiple Rings
 Leave the fields VLAN ID (default 0) and MRP Domain (default
255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.2
55) as they are. The example configuration does not require any
change here.
 Click "Set" to save the changes temporarily.
 Click "Back" to return to the Sub-Ring dialog.
enable
configure
sub-ring new-ring 1
Sub-Ring ID created:ID: 1
sub-ring 1 port 1/9
Port set to 1/9
sub-ring 1 ring-name Test
Sub-Ring Ring name set to "Test"
sub-ring 1 mode manager
Mode of Switch set to manager
 Click "Reload" to update the Sub-Ring overview and check all the
entries.
UM RedundConfig L2P
Release 8.0 05/2013
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
Creates a new Sub-Ring with the Sub-Ring ID 1.
Defines port 9 in module 1 as the Sub-Ring port.
Assigns the name "Test" to Sub-Ring 1
Configures the mode of this Sub-Ring Manager
as "manager".
4.1 Sub-Ring
55