Hirschmann RS20 User Manual page 31

Ring Redundancy
Figure 10: Ring Redundancy dialog (RSR20, RSR30, MACH 1000)
 Activate the ring manager for this device. Do not activate the ring
manager for any other device in the HIPER-Ring.
 In the "Ring Recovery" frame, select the value "Standard" (default).
Note: Settings in the "Ring Recovery" frame are only effective for
devices that you have configured as ring managers.
 Click "Set" to save the changes temporarily.
enable
configure
hiper-ring mode ring-manager Select the HIPER-Ring ring redundancy and
Switch's HIPER Ring mode set to ring-manager
hiper-ring port primary 1/1
HIPER Ring primary port set to 1/1
hiper-ring port secondary 1/2 Define port 2 in module 1 as ring port 2.
HIPER Ring secondary port set to 1/2
exit
UM RedundConfig L2P
Release 8.0 05/2013
3.1 Example of a HIPER-Ring
Switch to the privileged EXEC mode.
Switch to the Configuration mode.
define the device as ring manager.
Define port 1 in module 1 as ring port 1.
Switch to the privileged EXEC mode.
31