Link Aggregation
2.2 HIPER-Ring and
Link Aggregation
Note: If you want to use a link aggregation in a HIPER-Ring, you first
configure the link aggregation, then the HIPER-Ring. In the HIPER-Ring
dialog, you enter the index of the desired link aggregation as the value for the
module and the port (8.x). Ascertain that the respective ring port belongs to
the selected link aggregation.
Note: Deactivate RSTP when link aggregations are segments of a HIPER-
Ring.
UM RedundConfig L2P
23
Release 8.0 05/2013