Hirschmann RS20 User Manual page 63

Ring/Network Coupling
Device with
DIP switch
DIP switch/software switch
option
Software switch
Table 9: Setting the STAND-BY switch
Note: In the following screenshots and diagrams, the following conventions
are used:
 Blue indicates devices or connections of the items currently being
described

Black indicates devices or connections that connect to the items currently
being described
 Thick lines indicate connections of the items currently being described

This lines indicate connections which connect to the items currently being
described
 Lines of dashes indicate a redundant connection

Dotted lines indicate the control line.
 Select the Redundancy:Ring/Network Coupling dialog.
 You first select the configuration you want: One-Switch coupling
("1"), two-Switch coupling ("2") or two-Switch coupling with control
line ("3"),
UM RedundConfig L2P
Release 8.0 05/2013
Choice of main coupling or redundant coupling
On "STAND-BY" DIP switch
According to the option selected
- on "STAND-BY" DIP switch or in the
- Redundancy:Ring/Network Coupling dialog, by making
selection in "Select configuration".
Note: These devices have a DIP switch, with which you can choose
between the software configuration and the DIP switch
configuration. You can find details on the DIP switches in the User
Manual Installation.
In the Redundancy:Ring/Network Coupling dialog
(see figure 22).
5.2 Preparing a Ring/Network
Coupling
63