Hirschmann RS20 User Manual page 120

Spanning Tree
exit
interface 1/3
spanning-tree port mode
exit
 Configure the global settings, using S1 as an example:
– the RSTP priority
– global operation
– the MRP compatibility mode
spanning-tree mst priority 0
4096
spanning-tree
spanning-tree stp-mrp-mode
 Configure the other switches S2 though S6 with their respective values
(see table 17).
 Connect the redundant RSTP connection.
120
6.7 Combining RSTP and MRP
Switch to the Configuration mode.
Switch to the interface configuration mode for
port 1.3.
Activate RSTP on the port.
Switch to the Configuration mode.
Set the RSTP priority for the MST instance 0 to
the value 4,096. the MST instance 0 is the default
instance.
Activate RSTP operation globally.
Activate MRP compatibility.
UM RedundConfig L2P
Release 8.0 05/2013