Ring/Network Coupling
The coupling mode indicates the type of the connected network.
In the "Coupling Mode" frame, select
– "Ring Coupling" or
– "Network Coupling"
Figure 35: Two-Switch coupling: Selecting the coupling mode
Select "Ring coupling" if you are connecting to a redundancy ring.
Select "Network Coupling" if you are connecting to a line or tree
structure.
Delete coupling configuration
The "Delete coupling configuration" button in the dialog allows you
to reset all the coupling settings of the device to the state on delivery.
78
5.2 Preparing a Ring/Network
(see figure 35)
UM RedundConfig L2P
Coupling
Release 8.0 05/2013