About This Manual - Hirschmann RS20 User Manual

About this Manual

About this Manual
The "Redundancy Configuration" user manual document contains the
information you require to select the suitable redundancy procedure and
configure it.
The "Basic Configuration" user manual contains the information you need to
start operating the device. It takes you step by step from the first startup
operation through to the basic settings for operation in your environment.
The "Installation" user manual contains a device description, safety
instructions, a description of the display, and the other information that you
need to install the device.
The "Industry Protocols" user manual describes how the device is connected
by means of a communication protocol commonly used in the industry, such
as EtherNet/IP and PROFINET IO.
The "Graphical User Interface" reference manual contains detailed
information on using the Graphical User Interface to operate the individual
functions of the device.
The "Command Line Interface" reference manual contains detailed
information on using the Command Line Interface to operate the individual
functions of the device.
UM RedundConfig L2P
5
Release 8.0 05/2013