Canon MF720 Series Service Manual page 74

4. The message shown below which is displayed during the process will disappear. When the display has returned to
the original state, remove the USB flash drive.
5. Enter service mode, and check that the setting information is reflected.
This completes the procedure for importing a setting information file.
■ Procedure for Export/Import Using Remote UI (Service Mode)
By operating from the remote UI, it is possible to export/import a file containing service mode setting information from/to a USB
flash drive connected to the host machine or the local disk on the PC.
● Procedure for Export Using Service Mode (Remote UI)
With this model, service mode can be used from the Remote UI.
Setting information can be exported by remote control by following the procedure shown below.
Since the information can be output only to a USB flash drive connected to the host machine, this is not strictly remote
operation.
The following USB flash drives can be used for export/import.
• USB flash drive in FAT 16 format (storage capacity: 2 GB)
• USB flash drive in FAT 32 format (storage capacity: 32 GB)
1. Connect a USB memory device to the USB memory port.
2. Enter service mode, and execute the following service mode.
Access service mode (Remote UI), select COPIER > FUNCTION > SYSTEM > EXPORT, and click [EXEC].
CAUTION:
When it is executed without connecting USB flash drive, the error message is not displayed.
Processing doesn't export anywhere of any though it seems to have completed it correctly.
Confirm USB memory device has been connected before it executes it from the above-mentioned reason without fail.
SERVICE MODE
DISPLAY
COPIER
IO
FEEDER
ADJUST
FAX
FUNCTION
TESTMODE OPTION
COUNTER
Executing. . .
CCD
PANEL-UP
CLEAR
LOGWRITE
MISC-R
IMPORT
MISC-P
EXPORT
SYSTEM
VIFFNC
SPLMAN
PANEL-UP
LOGWRITE
IMPORT
EXPORT
66
2. Technical Explanation