2. Remove the Secondary Transfer Feed Unit [1].
• 1 screw [2]
CAUTION:
When removing the screw, be careful not to lose the
guide cap [1] because the guide cap is removed
together with the screw.
1x
[2]
Removing the Delivery Unit
■ Preparation
1. Removing the Right Cover.(Refer to
Right Cover" on page
2. Removing the Left Cover.(Refer to
Left Cover" on page
3. Removing the Rear Upper Cover.(Refer to
"Removing the Rear Upper Cover" on page
[1]
"Removing the
120)
"Removing the
118)
123)
4. Removing the Rear Cover.(Refer to
Rear Cover" on page
5. Removing the Rear Lower Cover.(Refer to
"Removing the Rear Lower Cover" on page
6. Removing the Rear Cover Rib Unit.(Refer to
"Removing the Rear Cover Rib Unit" on page
7. Removing the Duplex Printing Reverse Drive Unit.
(Refer to
"Removing the Duplex Reverse Drive Unit"
on page
179)
8. Removing the Fixing Assembly.(Refer to
the Fixing Assembly" on page
9. Removing the ADF Unit + Reader Unit.(Refer to
"Removing the ADF Unit + Reader Unit" on page
130)
10. Removing the Upper Cover.(Refer to
Upper Cover" on page
■ Procedure
1. Remove the frame [1].
• 6 screws [2]
• 2 hooks [3]
6x
[2]
[3]
[1]
[2]
220
4. Disassembly/Assembly
"Removing the
123)
200)
"Removing the
125)
[1]
[3]
123)
125)
"Removing
[2]
[2]