Removing The Scoopup Sheet Holder - Canon MF720 Series Service Manual

1. Remove the ADF Motor [1] in the direction of the
arrow.
• 2 screws [2]
• 1 belt [3]
2x
[1]
CAUTION:
When installing the ADF Pickup Motor, be sure to hook
the gear [1] of the motor on the belt [2].
[1]
[3]
[2]
[2]
[2]
CAUTION:
When installing the ADF Pickup Motor, be sure to install
with the connector [1] on the right side.
Removing the Scoopup sheet
holder
■ Preparation
1. Remove the Right Cover.(Refer to
Right Cover" on page
2. Remove the Left Cover.(Refer to
Cover" on page
3. Remove the ADF Unit + Reader Unit.(Refer to
"Removing the ADF Unit + Reader Unit" on page
130)
4. Seaparare the ADF Unit from the Reader Unit.(Refer
to "Separating the ADF Unit + Reader Unit" on page
131)
■ Procedure
CAUTION:
Be sure to perform "After Replacing the Scoopup sheet
holder (Refer to "After Replacing the Scoopup Sheet
Holder" on page 143)" when replacing the Scoopup
sheet holder, respectively.
142
4. Disassembly/Assembly
[1]
[1]
"Removing the
120)
"Removing the Left
118)