Couter - Canon MF720 Series Service Manual

Item
Adj/set/operate method
Display/adj/set range
Default value
WLANMODE
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
■ SERIAL
Item
SN-MAIN
Title
Details
Use case
Adj/set/operate method
Caution
Related service mode
Related user mode

COUTER

■ TOTAL
Item
SERVICE1
Title
Details
Display/adj/set range
Unit
Default value
COPIER > OPTION > ACC
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
0 to 1
0: Disabled
1: Enabled
0 (Model where wireless LAN is provided as an option)
1 (Wireless LAN model)
Setting of IEEE802.11n
To set whether to enable IEEE802.11n which is the wireless LAN standard.
Upon user's request
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
0 to 1
0: Disabled
1: Enabled
1 (All models)
COPIER > OPTION > SERIAL
Entry of serial number
To write the serial number of this machine in the Main Controller PCB.
When this item is executed, the 8-digit alphanumeric entered in System Settings > Device Information >
Location in user mode is written in the Main Controller PCB.
When replacing the Main Controller PCB, be sure to write the serial number in the new PBC to prepare for
trouble since the serial number of the device is not succeeded.
When replacing the Main Controller PCB
1. Write down the current data in System Settings > Device Information > Location in user mode.
2. After turning OFF the main power, replace the Main Controller PCB.
3. Enter the serial number (8-digit alphanumeric) in "Location" of step 1.
4. Execute SN-MAIN. After writing, the serial number entered in step 3 is deleted.
5. Turn OFF and the ON the main power.
6. Execute COPIER > FUNCTION > MISC-P> SPEC to output the spec report to check the serial number.
7. Enter the data backed up in step 1 in "Location".
Since the above "Location" is only temporarily used to store data, back up the data before input and enter
it again after writing is completed.
COPIER > FUNCTION > MISC-P > SPEC
System Settings > Device Information> Location
COPIER > COUNTER > TOTAL
Service-purposed total counter 1
To advance the counter when a paper is delivered outside the printer.
The counter is advanced regardless of the original size. The counter is not advanced by delivery in service
mode.
0 to 99999999
Number of sheets
0
Description
Description
Description
295
8. Service Mode