Canon MF720 Series Service Manual page 183

7. Remove the DC Controller Support Plate [1].
• 1 Special Flat-head Screw [2]
• 2 Black Screws [3]
• 3 Screws [4]
• 2 Bosses [5]
• 1 Protrusion [6]
CAUTION:
Since the Special Flat-head Screw [2] adjusts the
interval between the plate [1] and parts in the vicinity,
be sure to install the Special Flat-head Screw [2] in the
location it was in before removal.
[1]
6x
[3]
[5]
CAUTION:
When installing, be sure to place the [A] part of DC
Controller Support Plate under the [B] part of the
Harness Guide.
[A]
[B]
[6] [2] [3] [4]
[5]
[4]
8. Remove the Main Switch Unit [1].
• 2 Screws [2]
• 1 Hook [3]
• 1 Reuse Band [4]
9. Remove the Main Switch Unit Connecting Plate [1].
• 3 Screws [2]
[2]
3x
175
4. Disassembly/Assembly
[3]
2x
[2]
[1]
1x
[4]
[1]
[1]
[2]