Canon MF720 Series Service Manual page 75

3. The message shown below which is displayed during the process will disappear. When the display has returned to
the original state, remove the USB flash drive.
4. Check that a setting information file (service.dcm) exists in the directory directly under the root of the USB flash
drive.
This completes the procedure for exporting a setting information file.
● Procedure for Import Using Service Mode (Remote UI)
Import the service mode setting file that was exported to the USB flash drive in the previous procedure into the host
machine.
1. To the directory directly under the root of the USB flash drive, save a setting information file (service.dcm) to be
imported.
2. Connect a USB memory device to the USB memory port.
3. Enter service mode, and execute the following service mode.
Access service mode (remote UI), select COPIER > FUNCTION > SYSTEM > EXPORT, and click [EXEC].
4. The message shown below which is displayed during the process will disappear. When the display has returned to
the original state, remove the USB flash drive.
5. Enter service mode, and check that the setting information is reflected.
This completes the procedure for importing a setting information file.
67
2. Technical Explanation