■ Procedure
1. Remove the wire harness [1] from the wire harness
cover [2].
• 2 connectors [3]
[2]
[1]
[3]
2x
[1]
CAUTION:
Be sure to insert the 2 harnesses [1] at the bottom of
the Guide [A] when installing.
2. Open [1] the Duplex Feed Unit, and remove the
Duplex Reverse Drive Unit [2].
• 3 screws [3]
3x
[2]
Removing the Fixing/Fixing
Power Supply Cooling Fan Unit
■ Preparation
1. Removing the Right Cover.(Refer to
Right Cover" on page
180
4. Disassembly/Assembly
[A]
[1]
[A]
[1]
[3]
"Removing the
120)
[1]