Canon MF720 Series Service Manual page 295

Item
Display/adj/set range
Default value
SPL89821
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
Supplement/memo
SPL71100 *
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
SPL00171
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
SPL80100
Title
Details
Use case
Adj/set/operate method
Display/adj/set range
Default value
SPL27354
Title
Adj/set/operate method
Display/adj/set range
Default value
SPL84194
Title
COPIER > FUNCTION > SPLMAN
0 to 1
0 : OFF
1 : ON
0
Shop demonstration mode
To display image data on color UI repeatedly to appeal
the product features to potential users.
When appealing the product features to users at shops
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
0 to 1
0
When the setting value is 1 at startup, the shop demonstration mode is enabled.
Setting of the duty of Off-hook PCB
This is the mode to make handsets of particular manufacturers to ring when fax reception mode is
set to "Fax / Tel (Auto Switch)".
When fax reception mode is set to FAX/TEL switching
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
1 to 99
50
To change the maximum auto sleep shift time.
To change the maximum value of auto sleep shift time in Settings/Registration > Timer Settings >
Auto Sleep Time.
When changing the setting time to shift to auto sleep mode
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
From 0 (Default for Europe) to 60 min From 1 (Default for locations other than Europe) to Maximum
value for each model
1
Mask setting at copyboard scanning
To cancel the image mask occurs on the left edge at copyboard scanning.
Upon request from user who does not satisfy with the mask on the left edge
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
0: Mask value according to the specifications of each job
1: No mask (0 mm)
0
PC-less update, RMDS environment setting
1. Enter the setting value, and then press Apply key.
2. Turn OFF/ON the main power switch.
0: Production environment / Release environment
1: Production environment / Staging environment
2: Maintenance environment 1 / Release environment
3: Maintenance environment 1 / Staging environment
4: Maintenance environment 2 / Release environment
5: Maintenance environment 2 / Staging environment
0
ON / OFF of E-RDS function
Description
287
8. Service Mode