Mitsubishi FX3G Series User Manual page 45

FX /FX /FX PLC User's Manual - Positioning Control Edition
3G 3U 3UC
Built-in Positioning Functions
1.3 Version Numbers of Compatible PLCs
The availability of the built-in positioning functions depends on the PLC version number.
Compatible PLC
FX PLC
3U
FX PLC
3UC
FX PLC
3G
1. Version check
The D8001 special data register contains information for determining the PLC version.
D8001
PLC type and
version
2. How to look at the manufacturer's serial number
The year and month of production of the product can be seen from the manufacturer's serial number
"SERIAL" indicated on the label adhered to the right side of the product..
Compatible version Date (month and year)
number
Ver. 2.20 (initial product)
After May 2005
or later
Ver. 2.30 or later After November 2005
Ver. 1.00 (initial product)
After January 2004
or later
Ver. 1.30 or later After August 2004
Ver. 2.20 or later After May 2005
Ver. 2.30 or later After November 2005
Ver. 1.00 (initial product)
After June 2008
or later
2 4 1
PLC type Example: 24 = FX
Example: FX
MITSUBISHI
Right side
MODEL
OUT:30VDC/240VAC 2A(COSφ=1)
SERIAL
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN
1.3 Version Numbers of Compatible PLCs
of production
Equivalent to FX
Functions specified as "Ver.2.20 or
later" in this manual are applicable.
• DVIT instruction function is added.
- Designation of interrupt input
Functions specified as "Ver.2.20 or
later" in this manual are applicable.
• TBL instruction is added.
- GX Developer can set the
• PLSV instruction function is added.
- Acceleration/deceleration function
• DVIT instruction function is added.
- User interruption mode
• DSZR, ZRN instruction functions are
added.
- Designation of destination for
0 0
Version information (Example: Ver. 1.00)
/FX
3U 3UC
26 = FX PLC
3G
-48MR/ES (manufacturer's serial number: 570001)
3U
PROGRAMMABLE
CONTROLLER
FX -48MR/ES
3U
100-240VAC 50/60Hz 40W
570001
80M1 IND. CONT. EQ.
1
5 7 0 0 0
Control number
Month (Example: July):(1 to 9 = January to September,
X = October, Y = November, Z = December)
Year (Example: 2005): Last digit of year
1 Outline
Remarks
PLC Ver. 2.20
3UC
signal
positions using parameters.
CLEAR signal to be output
PLC
B - 7
A
B
Apx.