Mitsubishi FX3G Series User Manual page 110

FX /FX /FX PLC User's Manual - Positioning Control Edition
3G 3U 3UC
Built-in Positioning Functions
2) To use at a position other than just below the positioning instruction:
If two or more positioning instructions are used in a program, the "Instruction execution complete" flag
(M8029) and "Instruction execution abnormal end" flag (M8329) will be turned on or off after execution of
each instruction.
If it is necessary to use the "Instruction execution complete" flag or "Instruction execution abnormal end"
flag at a point other than just below the instruction, turn on or off another bit device just below the
instruction, and use the contact as the command contact.
Switches "instruction
execution complete"
flag of the DSW
instruction from M8029
to M100.
Switches the
"instruction execution
complete" flag of the
DDRVI instruction from
M8029 to M200.
B - 72
M8000
FNC 72
X10
DSW
M8029
Completion
of instruction
execution
M0
FNC158
K10000 K10000
DDRVI
M8029
Completion
of instruction
execution
Functions as the instruction
execution complete flag of
the DSW instruction.
M100
FNC 22
MUL
Functions as the instruction
execution complete flag of the
DDRVI instruction.
M200
4.7 Items To Be Observed in Programming
Y10 D0 K1
M100
Y000 Y004
M0
RST
M200
D0 K10 D20
Y030
4 Before Programming