Vermeer BC1200XL Operator's Manual page 90

Step 1: Refer to Starting Procedure, page 22-1.
With winch disengaged (Engage/Disengage Lever (1)
Step 2:
down), manually pull winch line out as far as needed.
Take chain choker with you in other hand.
IMPORTANT:
• Keep chain choker and winch line separated when pulling out
line.
• Never pull out winch line while brush or limbs are feeding into
the chipper.
• Never put winch line loop over arm or hand.
Step 3: Inspect line and chain choker for damage or wear before
each pull. See
50-18 Operating the Brush Chipper
Maintenance Manual for procedures.
1
LEFT SIDE CONTROLS (OPTION)
BC1200XL Brush Chipper
1