Vermeer BC1200XL Operator's Manual page 32

(6) Rear Warning Light - Center
BC1200XL Only:
Normal sensitivity setting selected . . . . . . . . . . . . . warning light off
Reduced sensitivity setting selected . . . . . . . . . . . . . warning light on
BC1200XL and BC1200XL European:
Light flashes quickly when feed roller needs to be restarted after
pressing Lower Feed Stop Bar or Side Feed Stop Bars, or pulling
Upper Feed Control Bar.
NOTE: When the Rear Warning Light flashes quickly, the Hold-to-
Run Button (4) must be pushed to reset stop system and stop
warning light from flashing.
20-10 Controls
4
BC1200XL
6
BC1200XL
EUROPEAN
6
BC1200XL Brush Chipper