Feed Roller - Engage - Vermeer BC1200XL Operator's Manual

Feed Roller - Engage

Start feed roller:
• Pull Upper Feed Control Bar (1) to FORWARD feeding position.
• Press Hold-to-Run Button (2).
• Pressing it briefly causes feed rollers to operate and the Lower Feed Stop Bar
and Side Feed Stop Bars to be ignored for one second.
• Holding it causes feed rollers to operate for up to 30 seconds regardless of
position of Upper Feed Control Bar, Lower Feed Stop Bar and Side Feed Stop
Bars (European). After 30 seconds, feed rollers stop, and can be reset by
releasing the Hold-to-Run Button and pressing it again.
BC1200XL Brush Chipper
1
3
Operating the Brush Chipper 50-5