Feed Roller Operation - Vermeer BC1200XL Operator's Manual

F R O
EED OLLER PERATION
DANGER: Limbs can snag clothing. Rollers or blades can grab and pull you in faster than you can let go
of limb. Cutting injury or death will result.
Feed material only from side of feed table.
Feed base of limb or branch first.
Wear gloves with narrow tight-fitting cuffs.
WARNING: Feed roller may start unexpectedly with a small increase in engine speed. Place
Upper Feed Control Bar in Center Stop and stop engine before working on or near feed roller
for any reason including cleaning, servicing and unclogging feed intake area.
With SmartFeed control operation, the feed roller will stop feeding material when engine RPM drops below
preset speeds, and will automatically restart when engine speed increases.
50-2 Operating the Brush Chipper
Never climb onto feed table.
Use wood object to push short material.
Keep away from rotating feed rollers and
blades.
BC1200XL Brush Chipper