Clean Flammable Materials From Machine - Vermeer BC1200XL Operator's Manual

Clean Flammable Materials from Machine

IMPORTANT: Machine controls and electrical/electronic devices are not rated to withstand high pressure water
and temperature power washers. Water intrusion will likely cause malfunction or damage to any devices hit
directly by the water spray. Keep pressure washer stream away from machine controls and electrical/electronic
devices. Compressed air can also push moisture through some connector and component seals. Do not point air
nozzle directly at seal areas.
Prevent fires by keeping engine compartment, battery, hydraulic lines, and fuel tank clean of accumulated
trash, grease, and debris.
BC1200XL Brush Chipper Preparing the Brush Chipper and Work Area 40-5