Winch Line - Store (Bc1200Xl Only) - Vermeer BC1200XL Operator's Manual

W L - S
INCH INE TORE
Step 1: Refer to Starting Procedure, page 22-1.
Step 2: Engage winch.
IMPORTANT: Retracting winch line too tightly may damage line.
Step 3: Hook loop at the end of winch line (1) onto interlock hook (2) above the feed
table as shown.
Step 4: Using the Winch Retract/Extend Lever, retract winch line until the hook slides
back and locks. Leave the line taut.
Step 5: Follow Shutdown Procedure,
Place separate chain choker in machine toolbox.
Step 6:
NOTE: Winch line must be in stored position for transporting and to operate machine in
chipping mode.
BC1200XL Brush Chipper
(BC1200XL O )
NLY
page 23-1.
1
2
LEFT SIDE CONTROLS
Transporting the Brush Chipper 30-11
2
( )
OPTION