Droop Set Switch - Vermeer BC1200XL Operator's Manual

Droop Set Switch

With SmartFeed control operation, the feed roller will stop and reverse feeding
material when the engine RPM drops below a preset speed, referred to as droop speed.
Feed roller will automatically restart when engine speed increases to a preset speed.
Droop speed can be adjusted to high, medium or low speed using Droop Set Switch (1).
Press bottom . . . . . . . . . . . . . . . . . . . . . . . . .low speed droop (brush)
Center . . . . . . . . . . . . . . . . . . . . . medium speed droop (small limbs)
Press top . . . . . . . . . . . . .high speed droop (large limbs and trunks)
BC1200XL Brush Chipper
1
Controls 20-13