Winch Controls - Left Side Controls Option (Bc1200Xl Only) - Vermeer BC1200XL Operator's Manual

W C
INCH ONTROLS
O )
NLY
(1)
Winch/Upper Feed Control Bar
Bar in center STOP or FORWARD . . . . . required to operate winch
Feed rollers will not operate while winch is engaged unless the
Hold-to-Run button (A) has been pushed.
(2) Winch Interlock Hook
Slide hook up:
(attach rope loop and pull with winch) . . . . . . . . . .winch locked out
Feed rollers will operate if Control Bar (1) is in forward position
and Hold-to-Run button (A) has been pushed.
Release and slide hook down:
(rope unhooked and winch lever pulled out) . . . . . . .winch unlocked
Winch Retract/Extend Lever (4) will move winch line if Winch
Engage/Disengage Lever (3) is pushed in. Feed rollers are "OFF"
when interlock hook is released.
20-18 Controls
- L S C
EFT IDE ONTROLS
O (BC1200XL
PTION
1
3
A
2
BC1200XL Brush Chipper