Maintenance Intervals; Safety Signs - Vermeer BC1200XL Operator's Manual

Section 60: Maintenance Intervals
WARNING: Use Shutdown Procedure before servicing, cleaning, repairing, or transporting
machine. Follow
Visually inspect machine daily before starting the machine.
Make no modifications to your equipment unless specifically recommended or requested by Vermeer
Corporation.
S S
AFETY IGNS
Safety signs located on your machine contain important and useful information. Refer to
help you operate your equipment safely, refer to the
To assure that all signs remain in place and in good condition, follow instructions given below:
• Keep signs clean. Use soap and water - not mineral spirits, abrasive cleaners, or other similar cleaners that
will damage the safety sign.
• Replace any damaged or missing signs. When attaching signs, the temperature of the mounting surface
must be at least 40°F (5°C). The mounting surface must also be clean and dry.
• When replacing a machine component with a sign attached, replace sign also.
• Replacement signs can be purchased from your Vermeer equipment dealer.
BC1200XL Brush Chipper
Shutdown Procedure, page 23-1.
Parts Manual for locations and for other information.
To
Controls, page 20-1.

Maintenance Intervals 60-1