Maintenance Manual; Hourmeter - Check For Maintenance Interval; Maintenance Intervals - Vermeer BC1200XL Operator's Manual

M M
AINTENANCE ANUAL
Maintenance intervals are included for reference only. Before performing any maintenance, refer to the

Maintenance Manual

for safety guidelines and correct procedures.
H - C
OURMETER HECK FOR
The hourmeter on the power unit is used to determine maintenance intervals for the machine. The hourmeter
indicates the total number of hours the engine has been in operation.
Maintenance intervals are based on normal operating conditions. When operating under severe conditions, the
maintenance intervals should be shortened.
M I
AINTENANCE NTERVALS
= Initial maintenance on new machine. Regular maintenance interval may be different.
Initial
= Regular maintenance interval.
Service
Cutter Drum Bearings - Grease
Feed Roller Bearings - Grease
Engine Drive Belt -Inspect
Engine Systems - Check
Engine Cooling System - Check
Crankcase Breather Tube - Inspect
Engine Oil Level - Check
Air Cleaner Restriction Indicator - Check

60-2 Maintenance Intervals

M I
AINTENANCE NTERVAL
5 10
Maintenance Interval - Service Hours
50 100 250
As
500 1000 2000 Reqd.
BC1200XL Brush Chipper