O
O
PERATING THE
PTIONAL
Winch Capacity
The intended use of the winch is to assist the operator in pulling large tree limbs or
trunks to the brush chipper feed rollers without having to lift and carry. The winch can
handle material up to 12" (30 cm) in diameter.
The line assembly includes a 150 ft (46 m), 7/16" line double-braided Spectra® core
with a polyester jacket (1) and a separate chain choker (2). The recommended drum
storage capacity is 150 ft (46 m). This conforms to SAE J706 using a wireline
compensation factor, K = 0.8.
Line Pull and Speed
The line pull and speed of the winch vary based on the number of line layers on the drum, where one layer
equals one row of wraps covering the drum surface. The chart shows rated line pull and line speed, established
in accordance with SAE J706.
Winch Line Layer
1
2
3
4
5
WARNING: Never exceed the rated winch capacity of 2000 lb (900 kg). Winch line may break or suddenly
release while pulling. Serious injury or death may occur if struck. Do not use towing vehicle pulling power to
increase the pulling capacity of winch.
BC1200XL Brush Chipper
W
(BC1200XL O
INCH
Line Pull
Line Speed
2000 lb/907 kg
73 ft/min (22 m/min)
1804 lb/818 kg
84 ft/min (26 m/min)
1609 lb/730 kg
96 ft/min (29 m/min)
1413 lb/641 kg
108 ft/min (33 m/min)
1217 lb/552 kg
119 ft/min (36 m/min)
)
NLY
Operating the Brush Chipper 50-13
2
1