Prepare The Brush Chipper - Vermeer BC1200XL Operator's Manual

P B
REPARE THE RUSH
WARNING: Check machine before operating. Machine must be in good operating condition
and all safety equipment installed and functioning properly.
• Survey area around the machine for persons or obstacles before positioning machine on the jobsite.
• Set up machine in an area free of obstructions that could interfere with the safe and efficient movement of
the operator. Never set up beneath a tree being pruned or removed.
• Position machine so working surface of feed table is a minimum of 24" (61 cm) above ground when feeding
material.
• During typical operation, the brush chipper must stay hitched to the towing vehicle.
• The brush chipper may be operated while unattached to the towing vehicle if:
• Machine is parked on a level surface.
• Tongue is supported by blocking.
• Rear jack is supporting infeed end of machine (BC1200XL European Only).
• Wheels are securely chocked.
• Optional winch is not used.
• If operating along a road, properly warn and divert motor vehicle and pedestrian traffic. Use all necessary
signs, cones, and flag persons needed for the work situation.
40-4 Preparing the Brush Chipper and Work Area
C
HIPPER
BC1200XL Brush Chipper