Hitch - Pintle - Vermeer BC1200XL Operator's Manual

IMPORTANT: Inspect each safety chain slip hook latch
system every time the machine is attached to a towing
vehicle. If the latch is damaged, missing, or does not
snap closed to the hook, the slip hook may not remain
coupled. Refer to "Maintenance as Required"
instructions on replacing damaged or missing safety
towing chains and hooks.
Fully raise jack (9), rotate 90° and secure to
Step 6:
tongue with attachment pin.

Hitch - Pintle

Step 1: Open pintle (1).
Back up towing vehicle until pintle is centered under pintle ring (2) of the
Step 2:
hitch.
Lower tongue until the pintle ring is seated in the pintle hook (3).
Step 3:
Latch pintle and lock with cotter pin (4).
Step 4:
30-6 Transporting the Brush Chipper
SPRING-
LOADED
LATCH
section for
SLIP
HOOK
2
1
4
BC1200XL Brush Chipper
9
3