Table of Contents
Advertisement
Installation
5.2 Securing the device with screws
Rack installation
Steps for fastening the device with screws
1
2
3
Swivel arm installation
Steps for fastening the device with screws
1
2
3
Switchgear cabinet installation
Steps for fastening the device with screws
1
2
3
4
5-4
Make drill holes at the prepared mounting cut-out in accordance with the specifications for L4
and L5, as shown at the dimensions in the mounting cut-out
Working from the front, insert the device into the 19" rack
Secure the control unit by inserting suitable screws through the holes and attaching nuts
Make drill holes at the prepared mounting cut-out in accordance with the specifications for L4
and L5, as shown at the dimensions in the mounting cut-out
Working from the front, place the device onto the swivel arm
Secure the control unit by inserting suitable screws through the holes and attaching nuts
Make drill holes at the prepared mounting cut-out in accordance with the specifications for L4
and L5, as shown at the dimensions in the mounting cut-out
Carefully drill the respective holes in the control unit at the designated location from the rear
Working from the front, insert the device into the mounting cut-out
Secure the control unit by inserting suitable screws through the holes and attaching nuts
Operating instructions, Release 07/2006, A5E00877780-01
SIMATIC Panel PC 877
Advertisement
Table of Contents
