Appendix; Command List - YOKOGAWA MT210 User Manual

Appendix

Command List

IM 767361-01E
A detailed description of each command is provided in these appendixes.
Command Description
Functions Common to the MT210, the MT210F, and the MT220
PZ Pressure zero calibration
PUm Setting the Units
PDm Sets the number of pressure display digits (4-1/2 or 5-1/2)
RELm Setting relative value display ON/OFF
HDm Setting data hold ON/OFF
E/<GET> Activates a trigger
AGm Sets averaging function ON or OFF
SIm Sets the pressure sample rate
BLm Turns the back lighting ON or OFF
BPm Turns the beep sound ON/OFF
DRm Sets the D/A output range
CMPm Sets the comparator output ON/OFF
CMDm,n Sets the comparator upper and lower limit
OD Measurement Data output request
OS Setting Information output request
OE Error code output request
Hm Turns the output header setting ON or OFF
DLm Sets output data terminator
IMm Sets the criteria for status byte interrupts
RC Initializes Settings
MT210F only
MSm Sets the measurement mode
DYm Turns ON/OFF D/A output dynamic mode
MT220 only
DISm Selects display mode
AL Sets 0% pressure automatically
AH Sets 100% pressure automatically
MLm, n Sets 0% pressure manually
MHm, n Sets 100% pressure manually
DMMn Sets DMM function ON or OFF
DFm Selects current or voltage measurement
VOm Sets 24 VDC output ON or OFF
ST Selects manual store of measured data
SOm Turns measurement data auto store ON or OFF
SMm Selects the storage mode (manual/auto)
SRm Sets the rate of auto store
SNDm Sets the number of data items to be stored in auto store mode
SNOm Sets the memory number to which data is to be stored
OM Requests output of the number of data which can be stored
ROm Turns measurement data recall mode ON or OFF
RNOm Selects the memory number from which data is to be recalled
ORDm,n Requests output of recall data
DBm,n Partially deletes the stored measurement data
DA Deletes all of the stored measurement data
SYm Switches between DMM calibration mode and normal measurement mode
CALm Selects the item to be DMM–calibrated
CVPm Sets DMM calibration points (DC5 V range)
CVDm Sets DMM calibration points (DC5 V range)
CAPm Sets DMM calibration points (DC20 mA range)
CADm Sets DMM calibration points (DC20 mA range)
*1: 767370 (MT210 1 kPa differential pressure model) only.
Notes
*1
/DA
/DA
/DA
/DA
App-1