Safety Precautions - YOKOGAWA MT210 User Manual

Safety Precautions

2
This product is designed to be used by a person with specialized knowledge.
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. If this instrument is used in a
manner not specified in this manual, the protection provided by this instrument may
be impaired. Also, YOKOGAWA assumes no liability for the customer's failure to
comply with these requirements.
This manual is part of the product and contains important information. Store
this manual in a safe place close to the instrument so that you can refer to it
immediately. Keep this manual until you dispose of the instrument.
General definitions of safety symbols used on the instrument and in the manuals
Handle with Care (To avoid injury, death of personnel, or damage
to the instrument, the user must refer to an explanation in the user's
manual or service manual.)
Alternating current
Direct current
ON (power)
OFF (power)
French
À manipuler délicatement. Toujours se reporter aux manuels
d'utilisation et d'entretien. Ce symbole a été apposé aux endroits
dangereux de l'instrument pour lesquels des consignes spéciales
d'utilisation ou de manipulation ont été émises.
Courant alternatif
Courant direct
Marche (alimentation)
Arrêt (alimentation)
• Use the Instrument Only for Its Intended Purpose
This instrument is designed to measure the pressure. Use this instrument
only as a pressure measurement.
• Check the Physical Appearance
Do not use the instrument if there is a problem with its physical appearance.
• Use the Correct Power Supply
Before connecting the power cord, ensure that the source voltage matches
the rated supply voltage of the instrument and that it is within the maximum
rated voltage of the provided power cord.
In-position of a bistable push control
Out-position of a bistable push control
Marche
Arrêt
WARNING
IM 767361-01E