Setting The Measurement Mode, The Wiring System, The Number Of Displayed Digits, The Null Function And Initializing Settings - YOKOGAWA PZ4000 User Manual

4.11 Setting the Measurement Mode, the Wiring
System, the Number of Displayed Digits, the
Null Function and Initializing Settings
IM 253734-61E
1. Click the Others button on the PZ Setting menu. The Others[PZ4000-*] dialog
box opens.
Click to open the Other dialog box.
↓
2. Select the PZ4000 (PZ4000-1 to PZ4000-4) using the check box.
You can select multiple PZs to specify the same settings.
Setting the Mode
3. The measurement mode is fixed to Normal (normal measurement mode).
Note
This software is designed for the normal measurement mode. There are no functions for the
harmonic measurement mode.
Setting the Wiring System
3. Select the wiring system from 1P2W–1P2W, 1P2W–1P3W, 1P2W–3P3W, 1P3W–
1P2W, 3P3W–1P2W, 3V3A, and 3P4W.
The meanings of the wiring symbols are shown below.
1P2W: single-phase, two-wire, 1P3W: single-phase, three-wire, 3P3W: three-
phase, three-wire, 3V3A: three-voltage, three-current, and 3P4W: three-phase,
four-wire
Setting the Resolution
3. Set the number of displayed digits to 5 (dgts = display resolution 99999) or 6 (dgts
= display resolution 999999).
Setting the Null Function
3. Turn ON or OFF the NULL function.
Initializing Settings
3. Click Initialize to initialize the PZ4000 to factory default settings.
Sending the Settings
4. Click the OK button to close the dialog box. The settings are transmitted to the PZ.
4
4-17